An investigation of 3M Cordova, IL production worker's per- and polyfluoroalkyl substances biomonitoring results and mortality experience.

Per- and polyfluoroalkyl substances (PFAS) are a wide-ranging group of chemicals that have been used in a variety of polymer and surfactant applications. While 3M Cordova, Illinois was not one of 3M's primary manufacturing facilities for the legacy long-chain PFAS (PFOS, PFOA, PFHxS), it has been a major manufacturing site for short-chain PFAS (compounds that are or may degrade to PFBS or PFBA). The purpose of this research focused on: 1) an analysis of biomonitoring data of employees and retirees, and 2) an analysis of the cohort mortality of workers from 1970 to 2018. Employees had higher PFBS and PFBA serum concentrations than the retirees, while retirees had higher concentrations for PFOS, PFOA, and PFHxS. Compared to the 2017-2018 NHANES data, employees' PFOS and PFHxS concentrations in 2022 were two-fold higher, with PFOA levels comparable. These NHANES data did not include serum PFBS or PFBA. Cross-sectional trends of PFOS and PFOA levels from 1997 to 2022 showed PFOS declined from 151 ng/mL to 10.4 ng/mL. Similarly, PFOA decreased from 100 ng/mL to 1.5 ng/mL. A longitudinal analysis of 48 participants with measurements in both 2006 and 2022 showed concentrations decreased by 74% for PFOS and 90% for PFOA. In the mortality study, 1707 employees who worked 1 day or longer were followed for an average of 25.6 years and had 143 (8%) deaths. There were no significantly elevated risks for any specific cause of death, regardless of latency period (0 or 15 years). While no specific PFAS exposures were examined, worker mortality experience (1970-2018) was analyzed by major departments representing primary work areas. Employees and retirees at the Cordova facility continue to have elevated PFOS and PFHxS serum concentrations compared to the general population, however, their legacy PFAS concentrations have declined over time, consistent with the estimated serum elimination half-lives of these PFAS in humans assuming nominal ambient exposures. For PFBS and PFBA, the results indicated no long-term accumulation in the blood likely due to their short serum elimination half-lives. After nearly 50 years of follow-up, this Cordova workforce showed no increased risk of mortality from cancer or any other specific cause of death.

1,3-Butadiene, styrene and selected outcomes among synthetic rubber polymer workers: Updated exposure-response analyses.

OBJECTIVE: - To evaluate exposure-response relationships between 1,3-butadiene and styrene and selected diseases among synthetic rubber polymer workers. METHODS: - 21,087 workers (16,579 men; 4508 women) were followed from 1943 through 2009 to determine mortality outcomes. Cox regression models estimated rate ratios (RRs) and 95% confidence intervals (CIs) by quartile of cumulative exposure to butadiene or styrene and exposure-response trends for cancers of the bladder, lung, kidney, esophagus and pancreas, and for all nonmalignant respiratory disease (NMRD), chronic obstructive pulmonary disease (COPD) and pneumonia. RESULTS: - Bladder cancer RRs were 2.13 (95% CI = 1.03 to 4.41) and 1.64 (95% CI = 0.76 to 3.54) in the highest quartiles of cumulative exposure to butadiene and styrene, respectively, and exposure-response trends were positive for both monomers (butadiene, trend p = 0.001; styrene, trend p = 0.004). Further analyses indicated that the exposure-response effect of each monomer on bladder cancer was demonstrated clearly only in the subgroup with high cumulative exposure (at or above the median) to the other monomer. Lung cancer was not associated with either monomer among men. Among women, lung cancer RRs were above 1.0 in each quartile of cumulative exposure to each monomer, but exposure-response was not seen for either monomer. Male workers had COPD RRs slightly above 1.0 in each quartile of cumulative exposure to each monomer, but there was no evidence of exposure-response among the exposed. Monomer exposure was not consistently associated with COPD in women or with the other cancer outcomes. CONCLUSIONS: - This study found a positive exposure-response relationship between monomer exposures and bladder cancer. The independent effects of butadiene and styrene on this cancer could not be delineated. In some analyses, monomer exposure was associated with lung cancer in women and with COPD in men, but inconsistent exposure-response trends and divergent results by sex do not support a causal interpretation of the isolated positive associations.

Application of fuzzy fault tree analysis based on modified fuzzy AHP and fuzzy TOPSIS for fire and explosion in the process industry.

This study aimed at establishing fault tree analysis (FTA) using expert opinion to compute the probability of an event. To find the probability of the top event (TE), all probabilities of the basic events (BEs) should be available when the FTA is drawn. In this case, employing expert judgment can be used as an alternative to failure data in an awkward situation. The fuzzy analytical hierarchy process as a standard technique is used to give a specific weight to each expert, and fuzzy set theory is engaged for aggregating expert opinion. In this regard, the probability of BEs will be computed and, consequently, the probability of the TE obtained using Boolean algebra. Additionally, to reduce the probability of the TE in terms of three parameters (safety consequences, cost and benefit), the importance measurement technique and modified TOPSIS was employed. The effectiveness of the proposed approach is demonstrated with a real-life case study.

The spatial distribution of total mercury in sediments in the Yatsushiro Sea, Japan.

The Yatsushiro Sea in Japan is contaminated with mercury in wastewater discharge from the Chisso Company, which produced acetaldehyde from 1932 onwards. In this study, we investigated the current spatial distribution of total mercury (T-Hg) in sediments, both at the surface and at different depths, using 43 sediment cores and 22 surface sediment samples collected from the Yatsushiro Sea in August 2017. Altogether, 821 surface and core samples were analyzed for their T-Hg concentrations. Most of the mercury that was discharged from Chisso remained either in, or around the exit of, Minamata Bay, but some had been transported from Minamata Bay to the Nagashima Sea. We estimated that almost 51 and 6 tons of mercury had accumulated in the Yatsushiro and the Amakusa Sea areas, respectively. The amount of acetaldehyde produced in Chisso over time was correlated with the T-Hg concentrations in the sediments from the Yatsushiro Sea.

Determinants and efficiency of Pakistan's chemical products' exports: An application of stochastic frontier gravity model.

The estimation of efficiency of industry-specific exports is very important to find exports' gap and to frame exports promotion policy for targeted industry. This study attempts to investigate the main determinants of chemical products' exports of Pakistan with 62 trading partners by applying Stochastic Frontier Analysis (SFA) on an augmented gravity model for a period 1995-2015. The results corroborate that chemical products' exports follow gravity patterns. This study finds a negative and significant impact of import tariff on exports of chemical products while the positive impact of devaluation has been observed. Further, the estimations also take into account the impact of Preferential Trade Agreements (PTA), colonial links, common language, political disputes and contiguity by incorporating dummy variable for each variable and the expected positive effects are found except an insignificant effect of Contiguity. Further, the negative impact of political disputes is observed. The exports' efficiency analyses reveal that Pakistan's chemical exports are well below the optimal level and there exists a huge untapped exports' potential with its neighboring, Middle Eastern and European countries.

Impact of REACH legislation on the production and importation of CMR (carcinogen, mutagen and reproductive) and explosive chemicals in Italy from 2011 to 2015.

On 1 June 2007, the European Commission issued the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) to protect both the environment and human health. We analyzed the impact of REACH in the Italian market considering the presence of chemicals, their diversity, importation and production during the period 2011-2015, with particular attention to products with toxic or explosive properties. There was a reduction of the chemicals on the market, in terms of tons but also the absolute numbers of types of compounds. The production reduction was particularly noticeable for explosive chemicals: -14.7%. CMR products did not show any statistically significant reduction in term of tons: -2.3%.

Evaluating the consumption of chemical products and articles as proxies for diffuse emissions to the environment.

In this study we have evaluated the use of consumption of manufactured products (chemical products and articles) in the EU as proxies for diffuse emissions of chemicals to the environment. The content of chemical products is relatively well known. However, the content of articles (products defined by their shape rather than their composition) is less known and currently has to be estimated from chemicals that are known to occur in a small set of materials, such as plastics, that are part of the articles. Using trade and production data from Eurostat in combination with product composition data from a database on chemical content in materials (the Commodity Guide), we were able to calculate trends in the apparent consumption and in-use stocks for 768 chemicals in the EU for the period 2003-2016. The results showed that changes in the apparent consumption of these chemicals over time are smaller than in the consumption of corresponding products in which the chemicals are present. In general, our results suggest that little change in chemical consumption has occurred over the timespan studied, partly due to the financial crisis in 2008 which led to a sudden drop in the consumption, and partly due to the fact that each of the chemicals studied is present in a wide variety of products. Estimated in-use stocks of chemicals show an increasing trend over time, indicating that the mass of chemicals in articles in the EU, that could potentially be released to the environment, is increasing. The quantitative results from this study are associated with large uncertainties due to limitations of the available data. These limitations are highlighted in this study and further underline the current lack of transparency on chemicals in articles. Recommendations on how to address these limitations are also discussed.

Mortality Among Hardmetal Production Workers: German Historical Cohort Study.

OBJECTIVE: The aim of this study was to investigate a cohort in German hardmetal industry, especially relationship between exposures to cobalt, with and without tungsten, and risks of total and cause-specific mortality. METHODS: The cohort comprises blue-collar workers at three German plants who were employed in hardmetal processing. Individual cumulative exposures and long-term average concentrations were estimated for cobalt, nickel, tungsten, respirable, and inhalable dust. Standardized mortality ratios (SMRs) were calculated for external comparisons. Time-dependent multivariable Cox models were performed for internal analyses. RESULTS: Elevated SMRs were found for all-cause, heart diseases, and nonmalignant respiratory diseases mortality, but not for lung cancer. Internal analyses did not show increased risks for any endpoints, and no exposure-response relationship was indicated. CONCLUSIONS: This study does not provide evidence for elevated lung cancer risks. Methodologic limitations, incomplete ascertainment of death causes in particular, impede conclusions about exposure effects.

Mortality Among Hardmetal Production Workers: The Swedish Cohort.

BACKGROUND: The mortality pattern was determined in a cohort of 16,999 white and blue-collar workers in the Swedish hardmetal industry, particularly for cobalt exposure and lung cancer. METHODS: The mortality follow-up analysis in the Swedish Mortality register covered the period from 1952 to 2012. The exposure measures were ever/never exposed, duration of exposure, cumulative, and mean cobalt concentrations. RESULTS: The mortality of all causes was significantly increased, highly associated with the short-term employed workers. A negative exposure-response was found for lung cancer and duration of exposure. An exposure-response was determined for cumulative and mean cobalt exposures analyzed by quartiles, but not for exposure classes. Internal comparison analysis using proportional hazard showed no exposure-response. CONCLUSIONS: The cohort lung cancer mortality showed no correlation to cobalt, nickel, or tungsten exposure.

Mortality Among Hardmetal Production Workers: US Cohort and Nested Case-Control Studies.

OBJECTIVES: To evaluate total and cause-specific mortality among hardmetal production workers with emphasis on lung cancer. METHODS: Subjects were 7304 workers ever employed in one of eight US plants from 1952 to 2008. Vital status through 2012 was determined for 97% of subjects and cause of death for 98.3% of 1087 deaths. We computed standardized mortality ratios (SMRs) and evaluated exposure-response via relative risk regression analysis. RESULTS: We observed overall deficits in deaths for total mortality, all cancers, and lung cancer and found no evidence of any exposure-response relationships for lung cancer. CONCLUSIONS: We found no evidence that exposure to tungsten, cobalt, or nickel, at levels experienced by the workers examined, increases lung cancer mortality risks. We also found no evidence that work in the US hardmetal industry increases mortality risks from any other causes of death.

Mortality Among Hardmetal Production Workers: Pooled Analysis of Cohort Data From an International Investigation.

OBJECTIVES: Based on a pooled analysis of data from an international study, evaluate total and cause-specific mortality among hardmetal production workers with emphasis on lung cancer. METHODS: Study members were 32,354 workers from three companies and 17 manufacturing sites in five countries. We computed standardized mortality ratios and evaluated exposure-response via relative risk regression analysis. RESULTS: Among long-term workers, we observed overall deficits or slight excesses in deaths for total mortality, all cancers, and lung cancer and found no evidence of any exposure-response relationships for lung cancer. CONCLUSIONS: We found no evidence that duration, average intensity, or cumulative exposure to tungsten, cobalt, or nickel, at levels experienced by the workers examined, increases lung cancer mortality risks. We also found no evidence that work in these facilities increased mortality risks from any other causes of death.

Mortality Among Hardmetal Production Workers: Swedish Measurement Data and Exposure Assessment.

BACKGROUND: Mortality pattern was determined in a cohort of 16,999 white and blue-collar workers in the Swedish hardmetal industry. Exposure assessment for cobalt is presented. METHODS: A historical database (1970 to 2012) of personal and area measurements of cobalt, tungsten, and nickel in the Swedish hardmetal industry was created. Log linear and exponential modeling of cobalt concentrations based on time period, job, and site was performed, and cumulative and mean exposures were calculated. RESULTS: Some 37% of the personal cobalt measurements exceeded 0.02 mg/m, mostly for powder production, pressing, and shaping. The log linear regression showed statistical differences (P < 0.05) between sites, time periods, and jobs. Some 1.6% of the cobalt cumulative exposures for blue-collar workers exceeded 0.4 mg/m years. CONCLUSION: Low levels of cumulative and mean exposures were determined.

A survey on selection, use, maintenance, and management of chemical protective gloves at workplaces in Japan.

OBJECTIVES: The aim of this study was to survey the selection, use, and maintenance of chemical protective gloves (CPGs) at real workplaces. METHODS: Subjects comprised 817 workers using CPGs at seven domestic manufacturing plants in Japan. We administered an anonymous questionnaire survey comprising the following aspect related to CPGs: environment of use, conditions of use, method of selection, knowledge/awareness pertaining to their use, method of use, precautionary measures associated with their use, maximum time of use, and maintenance. We compared responses provided by management staff and field workers. Chi square test was used for the analysis. RESULTS: Respondents included 661 (80.9%) manufacturing workers, 121 (14.8%) managers or supervisors, and 35 (4.3%) others. In total, 70.5% organic solvents, 28.9% acid or/and alkali, 18.1% dust, and 10.3% carcinogenic substances were the chemical substances handled using CPGs. The reason for deciding to wear CPGs was "the use of chemical substances" for 46.5%, "notice in safety data sheet (SDS) " for 29.8%, and "management staffs' guidance" for 21.4% respondents. "The grasp of chemical substances" was 70.1% (91.1% excluding "not applicable" ). "Warning of caution on skin and eyes" was indicated by 69.5% (91.0%) and "educational reasons for use of CPGs" was accepted by 68.1% (90.7%) respondents. On the other hand, the rate of responses such as "obtaining permeability test results of target substances" and "mixed substances are selected considering substances with short permeation time" was 25.2% (38.4%) and 29.2% (48.4%), respectively. The rate of "yes" as a response in the item concerning "permeation test" was low. On comparing the response provided by the management staff and field workers, the rate of "the permeation test result of the target substance was obtained" was 27.7% for management staff and 41.2% for field workers (p = 0.022). Regarding the cuffs of CPGs, the rate of "to fold back and to prevent sagging" and "mounted with tape" were 30.5% and 21.8% for management staff and 50.2% and 42.2% for field workers (p = 0.001 and p = 0.001), respectively. DISCUSSION: This survey results suggested that the knowledge of "permeation test" of CPGs was not yet popular at industrial workplaces. It is necessary to disseminate knowledge related to "permeation test" to the users from manufacturers of CPGs. Additionally, the employer should appoint an administrator to ensure that CPGs are worn and increase the understanding of correct knowledge and usage of CPGs among workers.

Mortality Among Hardmetal Production Workers: A Retrospective Cohort Study in the Austrian Hardmetal Industry.

OBJECTIVE: This study retrospectively investigates causes of death among workers of a hardmetal plant in Austria. METHODS: A retrospective cohort was formed of 1965 workers still employed in or after 1970. Follow-up was until end of 2014 based on national databases. Cobalt exposure was assessed through industrial hygiene data and urine analyses. Cox proportional hazards models were calculated for selected causes of death. RESULTS: During 45,598 years of observation in total 177 deaths were observed. Forty-nine workers died from any cancer, 10 from lung cancer, and three from chronic obstructive pulmonary disease. Only the latter showed a significant association with cumulative exposure. CONCLUSIONS: Although this is a young study population with little power to detect subtle effects, at least it does not indicate a pronounced cancer risk among tungsten carbide workers due to cobalt.

Mortality Among Hardmetal Production Workers: Occupational Exposures.

OBJECTIVE: To generate quantitative exposure estimates for use in retrospective occupational cohort mortality studies of the hardmetal industry. METHODS: Job-exposure matrices (JEMs) were constructed for cobalt, tungsten, and nickel over the time period 1952 to 2014. The JEMs consisted of job class categories, based on job titles and processes performed, and exposure estimates calculated from available company industrial hygiene measurements. RESULTS: Exposure intervals of one-half order magnitude were established for all three agents. Eight job classes had significantly decreasing time trends for cobalt exposure; no significant time trends were detected for tungsten or nickel exposures. CONCLUSIONS: The levels of exposures determined for this study were similar to or lower than those previously reported for the hardmetal industry during the 1952 to 2014 study period.

Mortality Among Hardmetal Production Workers: UK Cohort and Nested Case-Control Studies.

OBJECTIVE: The aim of this study was to characterize the mortality at two hardmetal production factories in the United Kingdom as part of an international study. METHODS: Standardized mortality ratios (SMRs) were calculated on the basis of mortality rates for England and Wales, and local rates. A nested case-control study of lung cancer was undertaken. RESULTS: The cohort comprised 1538 workers, with tracing complete for 94.4%. All-cause mortality was statistically significantly low for all cancers and nonmalignant respiratory disease, and for lung cancer was nonsignificantly low. The SMR for lung cancer for maintenance workers was elevated, based on only six deaths. The odds ratio for lung cancer per year of exposure to hardmetal was 0.93 (0.76 to 1.13). CONCLUSIONS: In this small study, there is no evidence to support that working in the UK hardmetal manufacturing industry increased mortality from any cause including lung cancer.

[Mortality study in a cohort of workers employed in the hot working processing of plastics and rubber]. / Studio di mortalità in una coorte di esposti nella lavorazione a caldo di materie plastiche e gomma.

OBJECTIVES: to study mortality rates among workers in companies manufacturing thermoplastic and rubber articles (excluding tyres). DESIGN: cohort study. SETTING AND PARTICIPANTS: the cohort includes 4,543 workers employed up to 2000 in 131 companies in the Province of Bologna (Emilia-Romagna Region, Northern Italy) exposed to emissions from hot processing of plastics (3,937) and rubber (606). MAIN OUTCOME MEASURES: general- and cause-specific Standardized Mortality Rates (SMR), with 95% confidence intervals; entire reference population resides in the Emilia-Romagna Region. RESULTS: excess mortality for all causes (116 Obs; SMR: 1.20; 95%CI 1.00-1.44) and for lung cancer (18 Obs; SMR: 1.67; 95%CI 1.05-2.65) in men of the rubber factories. Increased mortality rates for oesophageal cancers in women (3 Obs; SMR: 5.41; 95%CI 1.74-16.8) and in men (6 Obs; SMR: 2.16; 95%CI 0.97-4.81), for malignant tumours of pancreas (16 Obs; SMR: 1.65; 95%CI 1.01- 2.70), rectum (11 Obs; SMR: 2.17; 95%CI 1.20-3.92) and kidney (11 Obs; SMR: 1.98; 95%CI 1.10-3.58) in men occupied in plastic processing. CONCLUSION: in this study, we observed an excess of mortality rates for lung cancer in men of rubber factories and for malignant tumours of the digestive tract, pancreas, and kidney in workers employed in the production of plastic articles. Nevertheless, these results must be interpreted with caution, because exposures to non-occupational risk factors, like tobacco smoke or other occupational exposures outside the companies concerned, are not known. The results suggest to continue epidemiological surveillance.

Mortality risk among workers with exposure to dioxins.

BACKGROUND: In several studies, dioxin exposure has been associated with increased risk from several causes of death. AIMS: To compare the mortality experience of workers exposed to dioxins during trichlorophenol (TCP) and pentachlorophenol (PCP) production to that of the general population and to examine mortality risk by estimated exposure levels. METHODS: A retrospective cohort study which followed up workers' vital status from 1940 to 2011, with serum surveys to support estimation of historical dioxin exposure levels. RESULTS: Among the 2192 study subjects, there were nine deaths in TCP workers from acute non-lymphatic leukaemia [standardized mortality ratio (SMR) = 2.88, 95% confidence interval (CI) 1.32-5.47], four mesothelioma deaths (SMR = 5.12, 95% CI 1.39-13.10) and four soft tissue sarcoma (STS) deaths (SMR = 3.08, 95% CI 0.84-7.87). In PCP workers, there were eight deaths from non-Hodgkin's lymphoma (SMR = 1.92, 95% CI 0.83-3.79), 150 from ischaemic heart disease (SMR = 1.20, 95% CI 1.01-7.89) and five from stomach ulcers (SMR = 3.38, 95% CI 1.10-7.89). There were no trends of increased mortality with increased dioxin exposure except for STS and 2,3,7,8-tetrachlorodibenzo-p-dioxin levels. This finding for STS should be interpreted with caution due to the small number of deaths and the uncertainty in diagnosis and nosology. CONCLUSIONS: While some causes of death were greater than expected, this study provides little evidence of increased risk when dioxin exposures are considered.

Mortality among workers exposed to toluene diisocyanate in the US polyurethane foam industry: Update and exposure-response analyses.

BACKGROUND: Mortality among 4,545 toluene diisocyante (TDI)-exposed workers was updated through 2011. The primary outcome of interest was lung cancer. METHODS: Life table analyses, including internal analyses by exposure duration and cumulative TDI exposure, were conducted. RESULTS: Compared with the US population, all cause and all cancer mortality was increased. Lung cancer mortality was increased but was not associated with exposure duration or cumulative TDI exposure. In post hoc analyses, lung cancer mortality was associated with employment duration in finishing jobs, but not in finishing jobs involving cutting polyurethane foam. CONCLUSIONS: Dermal exposure, in contrast to inhalational exposure, to TDI is expected to be greater in finishing jobs and may play a role in the observed increase in lung cancer mortality. Limitations include the lack of smoking data, uncertainty in the exposure estimates, and exposure estimates that reflected inhalational exposure only. Am. J. Ind. Med. 59:630-643, 2016. Published 2016. This article is a U.S. Government work and is in the public domain in the USA.

[The importance of sanitary microbiological indices in the evaluation of epidemiological safety of water use in conditions of chemical contamination of water].

The increasing chemicalization of production and life leads to the pollution of water bodies by chemicals, the effect of which on the micro - and macro - organisms is poorly understood. This section of the study in sanitary bacteriology is becoming ever more topical and is an important task of modern hygienic science. One of complicacies of the study of the problem is related with the fact that the presence of only experimental data fails to be sufficient, as the impact of any given chemical substance on different bacteria in the experiment does not mean that under natural conditions, similar results will be obtained. One reason for this may be the inhibitory effect of the given chemical on biological properties of bacteria, while in field conditions in the water several chemicals interacting with each other can exist. In this regard, the aim of the work was to assess the indicator value of sanitary and microbiological indices of epidemic hazard of water use in conditions of chemical pollution of surface water bodies.